pvlib.modelchain.basic_chain

pvlib.modelchain.basic_chain(times, latitude, longitude, module_parameters, temperature_model_parameters, inverter_parameters, irradiance=None, weather=None, surface_tilt=None, surface_azimuth=None, orientation_strategy=None, transposition_model='haydavies', solar_position_method='nrel_numpy', airmass_model='kastenyoung1989', altitude=None, pressure=None, **kwargs)[source]

An experimental function that computes all of the modeling steps necessary for calculating power or energy for a PV system at a given location.

Parameters:
  • times (DatetimeIndex) – Times at which to evaluate the model.
  • latitude (float.) – Positive is north of the equator. Use decimal degrees notation.
  • longitude (float.) – Positive is east of the prime meridian. Use decimal degrees notation.
  • module_parameters (None, dict or Series) – Module parameters as defined by the SAPM. See pvsystem.sapm for details.
  • temperature_model_parameters (None, dict or Series.) – Temperature model parameters as defined by the SAPM. See temperature.sapm_cell for details.
  • inverter_parameters (None, dict or Series) – Inverter parameters as defined by the CEC. See pvsystem.snlinverter for details.
  • irradiance (None or DataFrame, default None) – If None, calculates clear sky data. Columns must be ‘dni’, ‘ghi’, ‘dhi’.
  • weather (None or DataFrame, default None) – If None, assumes air temperature is 20 C and wind speed is 0 m/s. Columns must be ‘wind_speed’, ‘temp_air’.
  • surface_tilt (None, float or Series, default None) – Surface tilt angles in decimal degrees. The tilt angle is defined as degrees from horizontal (e.g. surface facing up = 0, surface facing horizon = 90)
  • surface_azimuth (None, float or Series, default None) – Surface azimuth angles in decimal degrees. The azimuth convention is defined as degrees east of north (North=0, South=180, East=90, West=270).
  • orientation_strategy (None or str, default None) – The strategy for aligning the modules. If not None, sets the surface_azimuth and surface_tilt properties of the system. Allowed strategies include ‘flat’, ‘south_at_latitude_tilt’. Ignored for SingleAxisTracker systems.
  • transposition_model (str, default 'haydavies') – Passed to system.get_irradiance.
  • solar_position_method (str, default 'nrel_numpy') – Passed to solarposition.get_solarposition.
  • airmass_model (str, default 'kastenyoung1989') – Passed to atmosphere.relativeairmass.
  • altitude (None or float, default None) – If None, computed from pressure. Assumed to be 0 m if pressure is also None.
  • pressure (None or float, default None) – If None, computed from altitude. Assumed to be 101325 Pa if altitude is also None.
  • **kwargs – Arbitrary keyword arguments. See code for details.
Returns:

output ((dc, ac)) – Tuple of DC power (with SAPM parameters) (DataFrame) and AC power (Series).